| Williams, J., Fox, M.S., and Easterbrook, S., (2020), “A Constraint-Based Decision Support System for Capacity Planning in Interdependent Evolving Urban Systems”, in The City and Complexity – Life, Design and Commerce in the Built Environment, R. Lastman (Ed.), AMPS Proceedings Series 19.1 ISSN 2398-9467 | Available |
| Gwizdka, J., Fox, M. S., and Chignel, M., (1998), “Electronic Engineering Notebooks: A Study in Structuring Design Meeting Notes”, CHI 98 Conference Summary on Human Factors in Computing Systems, pp. 355-356, ACM | Available |
| Gwizdka, J., (1998), “From Free-Form to Structured Design Notes: A Study of Electronic Engineering Notebooks”, MASc. Thesis, Enterprise Integration Laboratory, University of Toronto. | Available |
| Baykan, C., and Fox, M.S., (1997), “Spatial Synthesis by Disjunctive Constraint Satisfaction”, Artificial Intelligence in Engineering, Design, and Manufacturing, Vol. 11, No. 4, pp. 1-18. | Available |
| Crabtree, R., Fox, M.S., and Baid, N., (1997), “Case Studies of Coordination Activities and Problems in Collaborative Design,” Research in Engineering Design, Vol. 9, No. 2, pp. 70-84. | Available |
| Bilgiç, T., (1997), “Risk management in concurrent engineering in presence of intelligent agents”, Technical report describing SDMA-Risk v 0.1. | Available |
| Bilgiç, T., (1997), “Systems management in concurrent engineering using intelligent software agents”, Proceedings of ISCIS ’97, the 12th International Symposium on Computer and Information Sciences, October 27-29, 1997, Antalya, Turkey. | Available |
| Bilgiç, T. , and Rock, D., (1997), “Product Data Management: State-of-the-art and the future”, Proceedings of the EIMP’97 , part of 1997 ASME Design Technology Cenferences, September 14-17, Sacremento, CA. | Available |
| J. Lin, M. S. Fox and T. Bilgic, (1997), “A Product Ontology”, Enterprise Integration Laboratory Technical Report . | Available |
| J. Lin, M. S. Fox and T. Bilgic, (1996), “A Requirement Ontology for Engineering Design”, Concurrent Engineering: Research and Applications , Vol. 4, No. 4, pp. 279-291, Sept. 1996. An earlier version appears in Proceedings of 3rd international conference on concurrent engineering, pages 343-351. | Available |
| Leizerowicz, W., Lin, J., and Fox, M. S., (1996), “Collaborative Design Using WWW”, Proceedings of WET-ICE ’96, CERC, University of West Virginia. | Available |
| Gwizdka, J., Louie, J., and Fox, M. S., (1996), “EEN: A Pen-based Electronic Notebook for Unintrusive Acquisition of Engineering Design Knowledge”, Proceedings of WET-ICE ’96, CERC, West Virginia University. pp. 40-46. | Available |
| Lin, J., M. S. Fox, L. Gupta, and W. Leizerowicz (1996) “Knowledge Network: an Information Repository with Services for Managing Concurrent Engineering Design”, Proceedings of WET-ICE’96, CERC, West Virginia University. | Available |
| Gupta, L., Chionglo, J., and Fox, M.S., (1996) “A Constraint Based Model of Coordination in Concurrent Design Projects”, Proceedings of WET-ICE ’96. | Available |
| Bilgic, T. and Fox M. S. (1996) “Constraint-based Retrieval of Engineering Design Cases: Context as constraints” , Gero J. and F. Sudweeks (eds) Artificial Intelligence in Design ’96. Kluwer Academic Publishers, pp. 269-288. | Available |
| Louie, J., (1995) “An Analysis of a Pen-Based Tool for Acquiring Engineering Design Information”, Technical Report TR-EIL-95-1, Enterprise Integration Laboratory, Department of Industrial Engineering, University of Toronto. | Available |
| Fox, M.S., Salustri, F.A., (1994), “A One-Off Systems Engineering Model”, AAAI Workshop on Artificial Intelligence and Systems Engineering , August 1994, Seattle, Washington. | Available |
| Crabtree, R., Baid, N., and Fox, M.S., (1993), “Design Engineering: Problems in Coordination”, in Proceedings of the JSME/ASME Design Theory Workshop , Tokyo Japan. | Available |
| Crabtree, R., Baid, N.K., Fox, M.S., (1993) “An Analysis of Coordination Problems in Design Engineering”, Proceedings of the International Conference on Engineering Design“, ICED ’93, The Hague, August 1993. | Available |
| Crabtree, R., Baid, N.K., Fox, M.S., (1993) “Where Design Engineers Spend/Waste Their Time”, appeared in Proceedings of AAAI ’93 Design Workshop , AAAI Press, Washington, D.C. | Available |
| Navinchandra, D., Fox, M.S., and Gardner, E.S., (1993) “Constraint Management in Design Fusion”, Concurrent Engineering: Methodology and Applications, P. Gu and A. Kusiak (Eds.), Elsevier Press. | Available |
| Baykan, C., and Fox, M.S., (1992), “WRIGHT: A Constraint-Based Spatial Layout Systems”, Artificial Intelligence in Engineering Design, Vol. 1, Design Representation and Models of Routine Design, D. Sriram & C. Tong (Ed.), Academic Press, pp 395-432. | Available |
| Finger, S., Fox, M.S., Prinz, F.B., and Rinderle, J.R., (1992), “Concurrent Design”, Applied Artificial Intelligence , Vol. 6, New York: Hemisphere Pub, pp 257-283. | Available |
| Fox, M.S., Finger, S., Gardner, E., Navin Chandra, D., Safier, S.A., and Shaw, M., (1992), “Design Fusion: An Architecture for Concurrent Design”, in Knowledge-aided Design , Green, M. (Ed.), London UK: Academic Press Ltd., pp. 157-195. | Available |
| Rychener M., Faranacci M., Hulthage I., and Fox M.S., (1992), “ALADIN: An Innovative Design System”, in Artificial Intelligence in Engineering Design Volume II: Models of Innovative Design, Reasoning about Physical Systems, and Reasoning about Geometry , C. Tong and D. Sriram (Eds.), San Diego CA: Academic Press Inc., pp. 263-286. | Available |
| Flemming, U., Baykan, C.A., Coyne, R.F., and Fox, M.S., (1992), “Hierarchial Generate-And-Test vs. Constraint-Directed Search”, Proceedings of the Conference on Artificial Intelligence in Design, Carnegie Mellon University, Pittsburgh, PA | Available |
| Baykan, C.A., and Fox, M.S., (1991), “Constraint Satisfaction Techniques for Spatial Planning”, in Intelligent CAD Systems III: Practical Experience and Evaluation , ten Hagen, P.J.W. and Veerkamp, P.J. (Eds.), Berlin: Springer Verlag, pp. 187-204. | Available |
| Hulthage, I., Farinacci, M.L., Fox, M.S., and Rychener, M.D., (1990), “The Architecture of ALADIN, A Knowledge-Based Approach to Alloy Design”, IEEE Expert, Vol. 5, No. 4, pp. 56-73. | Available |
| Safier, S., and Fox, M.S., (1989), “The Role of Architecture in Computer-Assisted Design Systems”, Proceedings of the 1989 NSF Engineering Design Conference, Amherst MA. | Available |
| Mogush, J.E., Carrega, D., Spirtes, P., and Fox, M.S., (1989), “Treatment Selection by Constraint Propagation: A Case Study in Cutting Fluid Selection”, Artificial Intelligence in Engineering Design, Analysis, and Manufacturing, Vol. 2, No. 3, pp. 135-168. Also appeared as CMU Technical Report CMU-RI-TR-86-15, Robotics Institute, Carnegie Mellon University, Pittsburgh PA. | Available |
| Finger, S., Fox, M.S., Navinchandra, D., Prinz, F.B., and Rinderle, J., (1988) “Design Fusion: A Product Life-Cycle View for Engineering Designs,” Proceedings of the Second IFIP WG 5.2 Workshop on Intelligent CAD, 19-22 September 1988, Cambridge, UK, edited by H. Yoshikawa and T. Holden. | Not Available |
| Hulthage, I., Farinacci, M.L., Fox, M.S., and Rychener, M.D., (1988), “Knowledge-Based Alloy Design”, Expert Systems for Engineering Design, M. Rychener (Ed.), Academic Press Inc., pp. 141-170. | Available |
| Baykan C., and M.S. Fox, (1987), “An Investigation of Opportunistic Constraint Satisfaction in Space Planning”, Proceedings of the International Joint Conference on Artificial Intelligence, Milano, Italy. | Available |
| Rychener M., Faranacci M., Hulthage I., and Fox M.S., (1986), “Integration of Knowledge Sources in Aladin, An Alloy Design System,” Proceedings of the Annual Conference of the American Association for Artificial Intelligence, Philedelphia PA. | Available |
| Farinacci M.L., Fox, M.S., Hulthage, I., Rychener, M.D., (1986), “The Development of ALADIN, An Expert System for Aluminum Alloy Design”, Robotics, Vol. 2, No. 4, pp. 329-337. | Available |
| Hulthage I., M.D. Rychener, M.S. Fox, and M.L. Farinacci, (1986), “The Use of Quantitative Databases in Aladin, an Alloy Design System”, In Kowalik, J.S. (Ed.), Coupling Symbolic and Numerical Computing in Expert Systems, Elsevier Science Publishers B.V., The Netherlands, pp. 209-216. Also appeared as Technical Report CMU-RI-TR-85-19, Robotics Institute, Carnegie-Mellon University, Pittsburgh, Pennsylvania. | Available |